|
Posted by Ignoramus15242 on April 18, 2008, 9:42 am
Please log in for more thread options
>
>>I have a mill, but no lathe.
>>
>>I splurged once and bought a lathe chuck with R8 backing. I found out
>>that I could actually perform the most basic turning operations, such
>>as using a cutoff blade and reducing diameters. This chuck was already
>>useful once. Just curious if anyone else tried it.
>
>
> I've turned pins using collets in my bridgeport, bits in the mill
> vise. Great minds think a like ;)
Yes, I kept the lathe bit in the vise. It is nice to have a R8 chuck,
however. They are not that expensive. $69 plus shipping.
i
|
|
Posted by Winston on April 18, 2008, 1:55 pm
Please log in for more thread options
Ignoramus15242 wrote:
> Yes, I kept the lathe bit in the vise. It is nice to have a R8 chuck,
> however. They are not that expensive. $69 plus shipping.
>
> i
Hey Iggy,
http://www.use-enco.com/CGI/INLMK3?PMK0NO=906327
I see Jacobs taper and 5C but not R8.
Where did you buy yours from?
--Winston
|
|
Posted by Ignoramus15242 on April 18, 2008, 2:01 pm
Please log in for more thread options > Ignoramus15242 wrote:
>
>> Yes, I kept the lathe bit in the vise. It is nice to have a R8 chuck,
>> however. They are not that expensive. $69 plus shipping.
>>
>> i
>
> Hey Iggy,
>
> http://www.use-enco.com/CGI/INLMK3?PMK0NO=906327
>
> I see Jacobs taper and 5C but not R8.
> Where did you buy yours from?
>
See ebay item 300216542264. I believe that I bought my chuck from
another ebay seller, but I know this guy also (bought something else
from him) and he is OK. I am only a satisfied customer, no other
relation to the seller.
i
|
|
Posted by Winston on April 18, 2008, 4:01 pm
Please log in for more thread options Ignoramus15242 wrote:
>>Hey Iggy,
>>
>>http://www.use-enco.com/CGI/INLMK3?PMK0NO=906327
>>
>>I see Jacobs taper and 5C but not R8.
>>Where did you buy yours from?
>>
>
>
> See ebay item 300216542264. I believe that I bought my chuck from
> another ebay seller, but I know this guy also (bought something else
> from him) and he is OK. I am only a satisfied customer, no other
> relation to the seller.
Got it!
Thanks, Iggy!
--Winston
|
|
Posted by Ignoramus15242 on April 18, 2008, 4:02 pm
Please log in for more thread options > Ignoramus15242 wrote:
>
>>>Hey Iggy,
>>>
>>>http://www.use-enco.com/CGI/INLMK3?PMK0NO=906327
>>>
>>>I see Jacobs taper and 5C but not R8.
>>>Where did you buy yours from?
>>>
>>
>>
>> See ebay item 300216542264. I believe that I bought my chuck from
>> another ebay seller, but I know this guy also (bought something else
>> from him) and he is OK. I am only a satisfied customer, no other
>> relation to the seller.
>
> Got it!
> Thanks, Iggy!
>
This chuck, works as advertised. Has two sets of jaws, also.
i
|
| Similar Threads | Posted | | Re: a real metalworking question - what is wrong | October 26, 2007, 1:14 am |
| Glued and Screwed | July 13, 2006, 12:02 pm |
| Metalworking | July 20, 2007, 3:59 pm |
| OT ER metalworking | December 28, 2007, 8:46 pm |
| some FUN-NY metalworking | February 18, 2008, 1:51 am |
| Now that's metalworking! | August 12, 2008, 12:39 am |
| The Future of Metalworking? | July 19, 2006, 11:18 am |
| Metalworking become top billionaire. | April 1, 2007, 1:34 pm |
| crafts.metalworking | June 17, 2007, 2:35 pm |
| FS metalworking equipment | June 23, 2007, 9:15 am |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap