Milling slide adapter for lathe

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Milling slide adapter for lathe rt 10-04-2006
Posted by rt on October 4, 2006, 2:58 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Grant Erwin on October 4, 2006, 4:09 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by rt on October 4, 2006, 4:14 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Cross Slide Vise on drill press for LIGHT milling December 11, 2007, 11:02 pm
wear in cross-slide nut contribute to lathe chatter? March 12, 2006, 9:04 am
UPDATE AND THANKS Milling on the lathe Vertical tslot table or vertical milling vise? April 1, 2006, 1:55 pm
fa: palmgren milling attachment for your lathe March 2, 2008, 2:34 am
Sherline Mill or the Lathe + Milling attachments ? July 2, 2006, 7:51 pm
Re: anybody got any generic milling or lathe proggys to show off? November 16, 2007, 4:16 am
Re: anybody got any generic milling or lathe proggys to show off? November 18, 2007, 10:27 pm
fa: atlas and south bend milling attachment for 10/12 inch lathe January 27, 2008, 1:59 am
Slip & Slide May 2, 2007, 5:24 pm
Has anyone here taken an english/metric HLV top slide apart? October 28, 2006, 6:58 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap