Milling steel, DREMEL???

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Milling steel, DREMEL??? lmcgill 07-19-2006
Posted by lmcgill on July 19, 2006, 11:10 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Dave Lyon on July 19, 2006, 11:17 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by lmcgill on July 19, 2006, 11:28 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Grant Erwin on July 19, 2006, 11:48 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Tim Killian on July 19, 2006, 2:45 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
dremel vs padlock August 4, 2006, 7:06 pm
Dremel tools October 12, 2007, 12:47 pm
Dremel Drilling Question July 4, 2006, 11:59 pm
Can you replace Dremel bearings February 3, 2008, 9:18 pm
Dremel EZ Lock 1-1/2 Cut-off Wheels? March 1, 2008, 11:46 am
UPDATE AND THANKS Milling on the lathe Vertical tslot table or vertical milling vise? April 1, 2006, 1:55 pm
Speed control on the 398 and 400 Dremel models September 2, 2007, 11:30 am
Trying to repair Dremel 850 'Free Wheeler' cordless. November 14, 2006, 10:14 am
Re: Runout measurement of Dremel Drill Press Stand March 7, 2006, 10:30 pm
how to bypass dremel tool internal variable speed control? September 9, 2007, 10:21 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap