Mirror finish

Home| Search | About

User Password

Lost Password?

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject

Author

Date

03-21-2007

Posted by Wayne on March 21, 2007, 8:52 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Posted by RAM³ on March 21, 2007, 9:18 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Gary Brady on March 21, 2007, 9:42 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Proctologically Violated©® on March 21, 2007, 9:48 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by NokNokMan on March 22, 2007, 12:08 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Similar Threads	Posted
Re: Mirror for Mag Base	November 2, 2007, 1:19 pm
Re: Mirror for Mag Base	November 2, 2007, 5:45 pm
Re: Mirror for Mag Base	November 2, 2007, 6:33 pm
these days Paulie will echo the collector, and if Shah specifically leaps it too, the mirror will dominate in response to the familiar venue	August 12, 2007, 8:11 pm
grinding finish	July 11, 2007, 8:56 am
Surface finish and DOC.	August 30, 2007, 10:35 am
Non-toxic finish on raw steel	October 15, 2006, 3:34 pm
SATIN CHROME FINISH	October 27, 2006, 8:30 am
Spray-on aluminum finish?	February 18, 2007, 2:44 pm
Finish cuts: how lite?	August 9, 2007, 9:53 am

XML Sitemap