Mixing Hydraulic Oil with Cutting Oil?

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Mixing Hydraulic Oil with Cutting Oil? montmach 06-11-2007
Posted by on June 11, 2007, 12:08 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Newshound on June 11, 2007, 1:16 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Larry Jaques on June 11, 2007, 4:26 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gunner on June 11, 2007, 8:44 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jim Sehr on June 11, 2007, 10:59 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
More cement mixing, and HF vs. HD April 30, 2006, 11:37 am
Mixing your own welding gasses questions July 9, 2006, 2:48 pm
Critical Dimensions For Mixing Venturi? December 14, 2006, 1:36 am
Re: Mixing soluble oils? Misting oils as flood coolant? October 28, 2007, 7:21 pm
Re: Mixing soluble oils? Misting oils as flood coolant? October 28, 2007, 7:31 pm
Re: Mixing soluble oils? Misting oils as flood coolant? October 30, 2007, 12:25 pm
Cutting oil v. thread cutting oil - difference? July 4, 2008, 8:45 pm
Re: Cutting oil v. thread cutting oil - difference? July 9, 2008, 9:05 pm
hydraulic info May 15, 2007, 10:07 pm
Re: Hydraulic question June 3, 2007, 6:44 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap