Monarch 10EE

Home| Search | About

User Password

Lost Password?

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject

Author

Date

11-15-2006

Posted by trg-s338 on November 15, 2006, 3:22 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Posted by erik litchy on November 15, 2006, 7:11 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by trg-s338 on November 15, 2006, 10:17 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Randy Replogle on November 15, 2006, 12:14 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Jon Elson on November 15, 2006, 4:22 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Similar Threads	Posted
FS: Monarch 10EE	October 24, 2006, 8:42 am
Monarch 10EE lathe	October 5, 2006, 3:08 am
Hardinge HLV-H vs. Monarch 10EE	August 18, 2008, 10:20 pm
Monarch 10EE hydraulic drive	November 18, 2006, 7:32 pm
Monarch EC	May 2, 2008, 7:55 pm
Monarch Table Saw	September 13, 2007, 2:06 am
10ee VFD mounting	October 27, 2008, 1:51 pm
for sale : monarch 16 cv lathe	December 4, 2006, 5:46 pm
10ee taper vernier	December 14, 2006, 1:07 pm
10EE turret lathe	May 4, 2006, 8:03 pm

XML Sitemap