Need 3 jaw chuck for logan 10"

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Need 3 jaw chuck for logan 10" msmeads2 01-22-2008
Posted by on January 22, 2008, 12:04 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Trevor Jones on January 22, 2008, 8:15 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Rex on January 22, 2008, 12:02 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by RoyJ on January 22, 2008, 12:33 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by DoN. Nichols on January 22, 2008, 8:58 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Logan 11" Lathe Chuck Removal June 9, 2007, 4:54 pm
Re: Chuck Key for Lodge & Shipley Collet Chuck August 26, 2006, 4:43 pm
Setting up job in 3 jaw chuck. Do you think I should machine chuck jaws??? January 30, 2007, 5:32 am
10" Logan $230!!!! December 5, 2006, 5:17 pm
thanks Scott Logan September 26, 2007, 8:26 pm
Logan lathe November 3, 2007, 12:16 am
Logan 7" Shaper May 8, 2006, 9:29 pm
thoughts on Logan lathes? August 16, 2006, 2:11 am
FS: LOGAN 10" BENCH LATHE September 19, 2006, 10:14 am
Logan Lathe Gloat October 21, 2006, 12:56 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap