Need Help - Stainless Steel Tubing

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Need Help - Stainless Steel Tubing Ned Buntline 03-20-2006
Posted by Ned Buntline on March 20, 2006, 10:45 pm
Please log in for more thread options
 Can anyone give me a link to an online supplier of stainless steel tubing?
I'm looking for someone who will sell small quantities (sometimes one
length).

Also, how does one go about bending stainless steel tubing? In particular,
sizes up to 1/2" OD.

Thanks ahead.



Posted by Tom Miller on March 21, 2006, 1:49 am
Please log in for more thread options
> Can anyone give me a link to an online supplier
> of stainless steel tubing? I'm looking for
> someone who will sell small quantities
> (sometimes one length).
>
> Also, how does one go about bending stainless
> steel tubing? In particular, sizes up to 1/2"
> OD.
>
> Thanks ahead.
Can't help with the suppliers unless you want to
get it in from Australia, but you can cold bend
annealed seamless stainless tube up to 1/2"
without too much trouble if you have a proper
tubing bender.



Posted by Jordan on March 21, 2006, 5:43 am
Please log in for more thread options
Alright - who's the Australian supplier?
I'd like to get some around 30-35mm OD.

Tom Miller wrote:
>
> Can't help with the suppliers unless you want to
> get it in from Australia

Posted by David Utidjian on March 21, 2006, 8:54 am
Please log in for more thread options
Ned Buntline wrote:
> Can anyone give me a link to an online supplier of stainless steel tubing?
> I'm looking for someone who will sell small quantities (sometimes one
> length).

In the USA try http://www.smallparts.com pricey but they have stuff.

Specifically:
http://www.smallparts.com/products/descriptions/gptx-mgptx-gpsx.cfm


> Also, how does one go about bending stainless steel tubing? In particular,
> sizes up to 1/2" OD.

No idea. Carefully?

> Thanks ahead.
>
>

Posted by Mike Henry on March 21, 2006, 9:09 am
Please log in for more thread options

> Can anyone give me a link to an online supplier of stainless steel tubing?
> I'm looking for someone who will sell small quantities (sometimes one
> length).
>
> Also, how does one go about bending stainless steel tubing? In
> particular, sizes up to 1/2" OD.
>

Try www.mcmaster.com - they sell stainless steel tubing in a wide variety of
sizes. Also tube benders.

Mike



Similar ThreadsPosted
Stainless steel nuts galling on stainless steel bolts April 9, 2006, 12:24 pm
help bending 1.5 stainless tubing December 7, 2006, 10:06 pm
Shining stainless steel September 5, 2006, 8:46 pm
Bending 304 stainless steel October 23, 2006, 9:23 am
Bending 4mm dia stainless steel rod December 5, 2006, 11:51 am
Polishing stainless steel October 30, 2007, 1:40 pm
Polishing stainless steel March 25, 2006, 8:48 am
CONE FROM STAINLESS STEEL March 5, 2008, 7:51 pm
Re: Building a Stainless Steel BBQ Grill August 26, 2006, 10:49 pm
Silver Soldering Stainless Steel October 18, 2006, 1:53 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap