Need a step pulley with a 7/8" bore with keyway

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Need a step pulley with a 7/8" bore with keyway Ignoramus2943 10-20-2006
Posted by Ignoramus2943 on October 20, 2006, 2:10 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Rex B on October 20, 2006, 3:14 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by =?ISO-8859-1?Q?Nick_M=FCller?= on October 20, 2006, 3:17 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jordan on October 20, 2006, 6:53 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Proctologically Violated©® on October 21, 2006, 11:47 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Bridgeport 2J vari-speed motor vs. step pulley head June 19, 2007, 4:20 pm
Excellent Mastercam Step by Step VideoTutorials March 3, 2007, 2:09 pm
keyway question September 22, 2006, 3:53 am
Cutting internal Keyway November 28, 2006, 7:42 am
cutting a keyway in a hardened & ground shaft July 24, 2006, 10:20 pm
HF Step drills? Aye or Nay January 13, 2007, 10:57 pm
Step Down 240V to 208V June 6, 2008, 9:18 pm
where did Hakim step the paper up the gigantic lid August 12, 2007, 10:49 pm
Rahavan's step shows around our action after we get at times it. August 13, 2007, 9:06 pm
Fowler Bore gauge November 21, 2006, 7:52 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap