Need help with milling setup

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Need help with milling setup Alex 12-09-2006
Posted by Alex on December 9, 2006, 2:57 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Polymer Man on December 9, 2006, 8:39 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Polymer Man on December 9, 2006, 8:41 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Kristian Ukkonen on December 9, 2006, 10:34 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Anthony on December 10, 2006, 12:29 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Milling setup question... June 15, 2007, 2:23 am
Advice on Tig (Heli-arc) setup? February 1, 2007, 7:29 am
Cylindrical grinder setup question. October 29, 2008, 8:56 am
Drill press tapping setup picture March 22, 2007, 9:40 pm
WTB: Hydraulic Chuck Setup for W&S #4 Squarehead Lathe September 18, 2007, 2:23 pm
How to setup a 3-phase 240V to 480V transformer? April 17, 2006, 4:33 pm
Lathe setup for tracking roller crown. March 30, 2006, 10:24 pm
Photo of the heavy duty cart/motor testing setup April 7, 2007, 11:35 am
UPDATE AND THANKS Milling on the lathe Vertical tslot table or vertical milling vise? April 1, 2006, 1:55 pm
running a 3phase MIG welder on a rotary converter setup - doable? impractical? impossible? April 9, 2006, 2:30 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap