Need pointer to a supplier of anodized aluminum channel in Austin, Texas

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Need pointer to a supplier of anodized aluminum channel in Austin, Texas Blake West 09-24-2007
Posted by Blake West on September 24, 2007, 3:12 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jim Chandler on September 24, 2007, 3:51 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Anthony on September 24, 2007, 9:09 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Martin H. Eastburn on September 24, 2007, 10:29 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Lapping Anodized Aluminum September 13, 2007, 7:27 am
Pre-anodized aluminum sheet? August 17, 2008, 4:14 pm
Re: Question: Temp reached by black anodized aluminum in direct sun January 20, 2008, 12:01 pm
Re: Question: Temp reached by black anodized aluminum in direct sun January 19, 2008, 12:41 pm
Re: Question: Temp reached by black anodized aluminum in direct sun January 19, 2008, 2:42 pm
Re: Question: Temp reached by black anodized aluminum in direct sun January 19, 2008, 9:27 pm
Re: Question: Temp reached by black anodized aluminum in direct sun January 21, 2008, 4:54 pm
Square Channel vs C Channel February 4, 2008, 3:30 am
making u-channel February 21, 2008, 12:37 pm
OT: Any of you guys familiar with Austin, TX? April 30, 2006, 9:15 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap