Non-petroleum lubricant

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Non-petroleum lubricant jn_alexander2 12-27-2006
Posted by Bill Marrs on December 27, 2006, 3:37 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Lloyd E. Sponenburgh on December 27, 2006, 3:58 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Martin H. Eastburn on December 29, 2006, 11:24 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Using ATF as a Way Lubricant May 11, 2008, 10:13 pm
Way and spindle lubricant June 11, 2007, 10:50 am
Scroll Chuck lubricant May 20, 2008, 4:25 pm
What is the proper lubricant for a four jaw chuck July 1, 2008, 10:25 pm
Lubricant for pillow block bearings March 13, 2007, 2:38 pm
Lubricant for handwheel / table bearings July 29, 2007, 2:29 pm
Spindle lubricant and speed questions April 14, 2008, 11:23 am
metal to metal contact lubricant? April 18, 2006, 8:44 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap