OT: More power from Microwave oven - Power to melt metal?

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
OT: More power from Microwave oven - Power to melt metal? Bart D. Hull 01-28-2007
Posted by Bart D. Hull on January 28, 2007, 1:19 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Joseph Gwinn on January 28, 2007, 2:19 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Robert Swinney on January 29, 2007, 9:22 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jon Elson on January 28, 2007, 4:03 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Christopher Tidy on January 28, 2007, 7:37 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
power factor correction for a scr power supply/welder? June 4, 2007, 6:21 am
VFD for Power Problem November 14, 2006, 9:42 am
Power supply use January 19, 2007, 6:15 pm
Now this is a power hacksaw March 3, 2007, 2:17 pm
Can this VFD power a 1 HP Bridgeport May 22, 2007, 11:20 pm
Milwaukee Power Tools July 6, 2006, 4:02 pm
Jet 2000 power hacksaw July 25, 2006, 10:01 am
Looking for an older power tool July 26, 2006, 10:20 pm
Re: Horse power of motor September 8, 2006, 6:25 pm
Re: Horse power of motor September 8, 2006, 7:27 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap