OT: Small diameter magnetic roller between wheels to provide frictionless braking resistance?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
OT: Small diameter magnetic roller between wheels to provide frictionless braking resistance? John Doe 08-29-2007
Posted by John Doe on August 29, 2007, 3:11 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ned Simmons on August 29, 2007, 3:43 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by John Doe on August 30, 2007, 2:48 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by JosephKK on September 1, 2007, 2:58 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by PeterD on August 29, 2007, 3:52 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Where to get small diameter sex bolts October 18, 2006, 12:29 am
WTB: Small Slip Roller February 23, 2007, 8:13 pm
Help with small cutting wheels March 29, 2006, 9:22 pm
Small Diameter Hole Guage December 3, 2006, 2:46 pm
small grinding wheels w/ fine grit May 22, 2007, 6:11 pm
PROVIDE BEST IT CONSULTANCY !!! November 14, 2008, 2:27 am
it's very beautiful, I'll measure about or Sue will provide the functions August 12, 2007, 8:10 pm
VFD braking August 1, 2008, 10:55 pm
VFD braking September 2, 2008, 11:42 pm
Braking resistor on a Bridgeport September 2, 2008, 3:46 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap