Old Starrett tool

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Old Starrett tool megabite60 04-01-2007
Posted by megabite60 on April 1, 2007, 8:43 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Wayne on April 1, 2007, 10:01 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Randy Replogle on April 1, 2007, 10:35 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Rebuilding old Starrett "Last Word" November 8, 2006, 8:24 am
Re: Starrett and Global Series September 14, 2007, 4:25 am
Re: Starrett and Global Series September 22, 2007, 11:53 am
Starrett Pocket Charts February 13, 2008, 6:23 pm
FA: Starrett 24" Digital Height Gage July 14, 2006, 2:21 pm
Need broken Starrett 731 digi-mics July 14, 2006, 10:37 pm
FA:6 Starrett Center Gages. Starts at $1 January 15, 2007, 2:12 pm
F.S. starrett master vernier caliper 14", digital depth gage, brown and sharpe stuff January 28, 2007, 2:10 pm
FS Tool cabinets from tool supply May 18, 2007, 12:38 am
Cut-off tool July 24, 2006, 9:53 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap