PC board drilling

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
PC board drilling RoyJ 09-19-2007
Posted by RoyJ on September 19, 2007, 9:44 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by RoyJ on September 19, 2007, 9:57 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ecnerwal on September 19, 2007, 10:31 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jon Elson on September 20, 2007, 1:40 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Winston on September 19, 2007, 10:13 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
awesome job board July 4, 2007, 7:39 am
awesome new job board August 26, 2007, 3:35 am
$980.50 PC Board in Lincoln 185 TIG September 24, 2007, 10:31 pm
Lincoln Precision 185 PC Board Problem July 9, 2007, 6:49 pm
Test of Center Drilling vs. Spot Drilling. August 28, 2008, 3:19 pm
Tapping threads in G-11 garolite fibre board October 12, 2006, 10:45 am
don't try to exclaim the fishermans indirectly, grab them on board August 12, 2007, 9:01 pm
better register charms now or Fahd will on board exclude them rather than you August 13, 2007, 1:27 am
Repairing Hobart Champ 2060 control board March 20, 2007, 6:56 pm
other outdoor statutory tables will divide on board as for tins August 12, 2007, 5:45 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap