Pneumatic planishing hammer

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Pneumatic planishing hammer Ivan Vegvary 08-31-2007
Posted by Ivan Vegvary on August 31, 2007, 12:31 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Andrew Mawson on August 31, 2007, 12:47 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Larry Jaques on August 31, 2007, 5:51 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by jk on September 1, 2007, 2:43 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ivan Vegvary on September 1, 2007, 4:34 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
FA: Rams Head Air Planishing Hammer March 12, 2006, 10:03 am
pneumatic sabre saw March 15, 2006, 12:48 pm
Strange pneumatic valve I ran into last night September 21, 2007, 9:29 am
recommendation for pneumatic regulator / oiler March 20, 2008, 12:33 am
Pneumatic rack and pinion drive June 26, 2008, 12:37 am
Pneumatic rotary actuator update June 28, 2008, 3:54 am
FS: Yale Pneumatic Tire Forklift, KY November 29, 2008, 10:31 am
WTB/Trade pneumatic rivet gun..ratatat type March 25, 2007, 3:45 pm
Chicago Pneumatic Impact Gun CP734 Parts October 1, 2007, 1:25 pm
Minor gloat, Compressor w/ pneumatic valves - question March 13, 2008, 11:25 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap