|
Posted by Louis Ohland on September 13, 2007, 1:17 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore
Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.
Cheers
--
Jeff R.
|
|
Posted by on September 13, 2007, 11:38 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore
Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.
Cheers
--
Jeff R.
|
|
Posted by Louis Ohland on September 14, 2007, 10:47 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore
Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.
Cheers
--
Jeff R.
|
|
Posted by on September 14, 2007, 12:14 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore
Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.
Cheers
--
Jeff R.
|
|
Posted by David Billington on September 14, 2007, 11:06 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore
Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.
Cheers
--
Jeff R.
|
| Similar Threads | Posted | | What is your technique for seting lathe compound at a precise angle? | August 4, 2007, 3:18 pm |
| Setting Lathe compound at precise angle, a Real Keeper!!! | August 5, 2007, 12:16 pm |
| Which quick change tool post set for this lathe? | May 2, 2006, 6:29 pm |
| Quick Change Toolpost for 9x20 lathe? | May 2, 2006, 5:42 pm |
| FS: Heavy Rolling Base for Table, Radial-Arm, Band Saw, Lathe, Drill Press - $45 | March 5, 2007, 12:11 pm |
| fractured compound | June 25, 2007, 10:51 pm |
| compound angle | July 27, 2007, 8:17 pm |
| Clausing Compound | May 28, 2008, 12:00 am |
| 9x20 Compound Clamp | September 18, 2007, 4:57 pm |
| Compound angle milling? | March 28, 2008, 9:59 am |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore