Rate my Metal Work!!

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Rate my Metal Work!! Smack 08-23-2007
Posted by Smack on August 23, 2007, 5:40 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on August 23, 2007, 12:17 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jim Stewart on August 23, 2007, 12:44 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Kelly Jones on August 23, 2007, 10:46 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Randy Replogle on August 24, 2007, 12:14 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Drill Press For Metal Work Versus Wood Work October 30, 2007, 10:09 pm
Good metal work... November 7, 2006, 11:55 am
Some awesome metal work. January 25, 2007, 11:24 pm
metal work site...... March 31, 2008, 4:56 am
Best metal for water feature work April 12, 2008, 3:48 am
Fein MultiMaster and Metal Work August 10, 2008, 10:51 pm
FS Vintage Art smithing blacksmith metal work manual 1896 October 27, 2008, 8:15 pm
OT: Is Uncle Sam a whack job? Rate your own pol December 2, 2006, 1:06 pm
South Bend feed rate May 11, 2007, 8:57 am
Feed Rate Question - Small Hole November 8, 2006, 3:01 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap