Re: 110vt buzzbox questions

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Re: 110vt buzzbox questions Leo Lichtman 04-21-2008
Posted by Leo Lichtman on April 21, 2008, 8:23 pm
Please log in for more thread options

"Gary Owens" wrote: If its 110v, are you running it off a 100ft 18ga
extension cord ? check
> your plug, check where it connects inside the box, you may have a bad
> connection, that could give a large voltage drop under load, but show good
> without load.
^^^^^^^^^^^^^^^^^^^
Gary, you evidently didn't notice this part of the original post: " Line
voltage is 124volts, on a 50
amp circuit. with a sag to 122volts when I strike an arc. "



Similar ThreadsPosted
Re: 110vt buzzbox questions April 21, 2008, 3:44 pm
Re: 110vt buzzbox questions April 21, 2008, 3:56 pm
Re: 110vt buzzbox questions April 21, 2008, 6:12 pm
Re: 110vt buzzbox questions April 24, 2008, 8:25 am
AC/DC buzzbox to tig. February 7, 2007, 5:49 pm
Buzzbox conversion to TIG welder February 3, 2007, 8:22 pm
RE:Buzzbox conversion to TIG welder February 7, 2007, 8:33 pm
240v speedway buzzbox on 120? May 3, 2006, 2:00 am
RE: Buzzbox Conversion To Tig Welder (minor gloat) February 8, 2007, 12:31 pm
MiniArc 130?-110vt stick welder February 11, 2007, 2:30 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap