Re: Air hammer chisel guidance

Home| Search | About

User Password

Lost Password?

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject	Author	Date
Re: Air hammer chisel guidance	Wild_Bill	10-18-2007

Posted by Wild_Bill on October 18, 2007, 6:47 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Similar Threads	Posted
Air hammer chisel guidance	October 11, 2007, 9:57 pm
shank adapter, extension rod, button bit, thread bit,taper bit, taper rod, drill rod, drill bit, corss bit, chisel bit, DTH hammer drilling ,rock drill, drill tube, casing shoe, drilling tool, core bit, core barrel, ODEX, TUBEX, quarrying,mining equipment	September 8, 2006, 2:22 am
I got a forklift, need some guidance	February 22, 2008, 10:32 am
Air chisel spring and general use IR121	February 23, 2008, 9:14 pm
Root nut installation using a small air chisel	March 28, 2008, 6:44 am
terrance, still imagining, squeezes almost basically, as the trainer piles despite their guidance	August 13, 2007, 12:33 am
uses for a hammer	March 5, 2008, 11:18 am
Hammer bounce	February 20, 2007, 12:33 am
What type of hammer is that ?	June 30, 2007, 4:05 pm
What is this hammer for? (metalworking, maybe)	August 5, 2007, 12:51 pm

XML Sitemap