|
Posted by Karl Townsend on March 12, 2006, 8:33 am
Please log in for more thread options
You've got plenty of good suggestions above.
I'll add that when I did a job like this, I finished by lapping the last 1/2
thousand in. Just take an old drill, cut the tang off, grind a couple
pockets along the side of the drill. Then apply lapping compound, clamp the
drill in the tailstock drill chuck, and run the lathe slow. You'll have a
mirror finish and a perfect taper.
Karl
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap