Re: Breakdowns in internal controls

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Re: Breakdowns in internal controls pyotr filipivich 04-10-2008
Posted by pyotr filipivich on April 10, 2008, 7:01 pm
Please log in for more thread options
[Default] I missed the Staff Meeting but the Minutes record that
08:42:54 -0400 in misc.survivalism :
>
>>
>> Doesnt the Democrat controlled Congress control the purse strings?
>>
>> Are you saying that the Dems in Congress are under Bush's mind control
>> rays?
>>
>> Gunner
>
>
>This Republican administration
>set out to wreck our government......
>this is the only job they've done well.
>

        And yet, you're still alive, and able to post freely.

        Or are you just one of the minions of the conspiracy? One of those
who's task is to mask the takeover?


pyotr
>
--
pyotr filipivich
The two oldest cliches in the book are "The Good Old Days were
better." and "After all, these are Modern TImes."

Posted by on April 10, 2008, 6:26 pm
Please log in for more thread options
> [Default] I =A0missed the Staff Meeting but the Minutes record that
> 08:42:54 -0400 in misc.survivalism :
>
>
>
> >> Doesnt the Democrat controlled Congress control the purse strings?
>
> >> Are you saying that the Dems in Congress are under Bush's mind control
> >> rays?
>
> >> Gunner
>
> >This Republican administration
> >set out to wreck our government......
> >this is the only job they've done well.
>
> =A0 =A0 =A0 =A0 And yet, you're still alive, and able to post freely.
>
> =A0 =A0 =A0 =A0 Or are you just one of the minions of the conspiracy? One =
of those
> who's task is to mask the takeover?
>
> pyotr

Hey! Quit giving Alex Jones more ideas.

Posted by pyotr filipivich on April 10, 2008, 8:15 pm
Please log in for more thread options
[Default] I missed the Staff Meeting but the Minutes record that
hot-ham-and-cheese@hotmail.com reported Elvis on Thu, 10 Apr 2008
15:26:05 -0700 (PDT) in misc.survivalism :
>> [Default] I  missed the Staff Meeting but the Minutes record that
>> 08:42:54 -0400 in misc.survivalism :
>> >> Doesnt the Democrat controlled Congress control the purse strings?
>>
>> >> Are you saying that the Dems in Congress are under Bush's mind control
>> >> rays?
>>
>> >> Gunner
>>
>> >This Republican administration
>> >set out to wreck our government......
>> >this is the only job they've done well.
>>
>>         And yet, you're still alive, and able to post freely.
>>
>>         Or are you just one of the minions of the conspiracy? One of those
>> who's task is to mask the takeover?
>>
>> pyotr
>
>Hey! Quit giving Alex Jones more ideas.

        Hey, he knows who signs his paychecks.

        Either that, or he really believes this wacko conspiracy that
would kill hundreds of thousands of people, yet still miss him as a
"loose end" needing to be "tidied up."

        He can't have it both ways, either George Bush is the smartest
president in the history of the world, or the Democrats in Congress
are dumber than the President.

pyotr
--
pyotr filipivich
The two oldest cliches in the book are "The Good Old Days were
better." and "After all, these are Modern TImes."

Posted by Cliff on April 11, 2008, 11:03 am
Please log in for more thread options
wrote:

>Either that, or he really believes this wacko conspiracy that
>would kill hundreds of thousands of people,

Such as the 650,000 ++ dead in Iraq?
--
Cliff

Similar ThreadsPosted
Re: Breakdowns in internal controls April 10, 2008, 7:44 am
Foot controls May 5, 2008, 5:54 am
Re: Controls Upgrading Idea April 20, 2006, 4:45 am
Light Machines controls and PC Interface card fs / value? April 3, 2007, 4:28 pm
Remote controls, servos, radio receivers April 19, 2007, 1:08 pm
lots of disabilitys will be urban related controls August 12, 2007, 9:57 pm
Hydraulics ,Pneumatics & Controls for Automation & Commercial Applications March 5, 2007, 8:51 pm
Re: CHICAGOLAND -- FREE submarine controls, 3 phase motor and gearmotor September 16, 2006, 12:00 am
Adjusting the speed controls on a Clausing 1300 engine lathe December 8, 2006, 11:35 am
Adjusting the speed controls on a Clausing 1300 engine lathe December 8, 2006, 11:35 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap