|
Posted by Ignoramus12441 on April 16, 2008, 9:14 pm
Please log in for more thread options
>
> On Apr 15, 9:48 am, Ignoramus15568 <ignoramus15...@NOSPAM.
> 15568.invalid> wrote:
>> Actually...
>>
>> I have a big reel (military) with a hub that has a appx. 3/4 inch
>> square hole.
>>
>> Is there some way to make a hose reel out of it for air hose? The air
>> would somehow need to enter the reel in the center of the hub's axis.
>>
>> i
>>
> You can get a right angle swivel for it, probably would cost about as
> much as an HF reel on sale. You could use a quick-connect pair, put
> the male stud on the reel on the axis and have the mating connector on
> an elbow to your compressor line. Probably the cheapest way. It'll
> eventually leak, but quick-connects are cheap.
>
>
> *************************************8
>
> The right angle swivel I got was a few $.
>
>
McMaster has some swivels that are not too expensive. I think that I
will get one and try to make a nice reel. This reel can easily
accommodate 150 ft of hose, which would be very helpful for some
cases.
i
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>
> I have a big reel (military) with a hub that has a appx. 3/4 inch
> square hole.
>
> Is there some way to make a hose reel out of it for air hose? The air
> would somehow need to enter the reel in the center of the hub's axis.
>
> i
>