|
Posted by Lloyd E. Sponenburgh on March 16, 2006, 11:26 am
Please log in for more thread options
> Anyone know of a good source for two way hydraulic
> cylinders.
>
> I'm looking for smaller bore cylinders, and can't seem
> to find anything smaller than 2 inch bore.
>
> I need a 24 inch stroke, and as small a bore as possible.
> Not much force required and I don't have much clearance length wise.
You say not much force is required. How much pressure will you run? If
it's under 200psi, many pneumatic cylinders may serve. They're not designed
for hydraulic use, but if you get a cylinder with a proper seal at the rod,
rather than a simple bushing, it'll work.
However, hydraulic cylinders are available in sizes down to 1/2". I don't
have the catalogs, because I do almost exclusively pneumatics here.
LLoyd
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> cylinders.
>
> I'm looking for smaller bore cylinders, and can't seem
> to find anything smaller than 2 inch bore.
>
> I need a 24 inch stroke, and as small a bore as possible.
> Not much force required and I don't have much clearance length wise.