Re: Shaft extention

Home| Search | About

User Password

Lost Password?

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject

Author

Date

07-18-2008

Posted by William Noble on July 18, 2008, 12:38 am

Please log in for more thread options

if you are not going to require much torque, why not just drill a hole in
the center and tap it and then thread in a huge shoulder bolt type shaft?

presumably it takes miniscule torque to rotate the cams against the switches

** Posted from http://www.teranews.com **

Posted by Tom Gardner on July 18, 2008, 1:09 am

Please log in for more thread options

> if you are not going to require much torque, why not just drill a hole in
> the center and tap it and then thread in a huge shoulder bolt type shaft?
>
> presumably it takes miniscule torque to rotate the cams against the switches

>
>
> ** Posted from http://www.teranews.com **

I don't want to remove the shaft and hand drilling and taping sounds like a
nightmare. If I pull the shaft, I'll just make a longer one, I've got plenty of
1" shafting stock.

Similar Threads	Posted
Re: Shaft extention	July 18, 2008, 5:53 am
Re: Shaft extention	July 18, 2008, 10:29 am
Re: Shaft extention	July 18, 2008, 11:37 am
Shaft extention update	July 18, 2008, 3:25 pm
Shaft keys ....	December 6, 2006, 2:20 am
Looking for "shaft coupler"	April 10, 2007, 12:43 pm
Shaft Wear	May 9, 2006, 9:44 pm
got the bent shaft out of the gear OK	September 27, 2006, 5:36 pm
PTO shaft tubing source?	November 8, 2006, 12:15 am
Making a handle and a shaft	May 14, 2006, 1:45 am

XML Sitemap