Re: THread repair question

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Re: THread repair question 07-03-2006
Posted by on July 3, 2006, 10:55 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jeff Wisnia on July 4, 2006, 12:12 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by MG on July 4, 2006, 4:47 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jeff Wisnia on July 4, 2006, 11:58 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Re: THread repair question July 3, 2006, 9:42 pm
Help with thread repair Recoil and HeilCoil September 18, 2006, 8:23 pm
Re: Another 4-start thread question - 1/4" internal thread April 2, 2006, 5:25 pm
Nissan repair question... November 13, 2006, 3:48 pm
Bridgeport repair question January 25, 2008, 11:14 am
Thread conversion question September 30, 2006, 10:20 am
Thread turning question November 16, 2006, 8:18 pm
Re: Thread turning question December 9, 2006, 4:53 pm
Re: Desoldering question (Miller XMT welder repair) January 30, 2008, 4:20 am
Re: Desoldering question (Miller XMT welder repair) January 30, 2008, 2:03 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap