Re: Trepanning and Parting Off - Loose Gibs Chatter Chips

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Re: Trepanning and Parting Off - Loose Gibs Chatter Chips F. George McDuffee 05-04-2008
Posted by F. George McDuffee on May 4, 2008, 7:47 pm
Please log in for more thread options
On Sun, 04 May 2008 18:46:54 -0400, Joseph Gwinn
<snip>
>Now I can trepan in forward rotation, without the drama, although there
>is some squealing
<snip>
========
Thanks for closing the loop. I often wonder how things turn out.
Sounds like a good job.


Unka' George [George McDuffee]
-------------------------------------------
He that will not apply new remedies,
must expect new evils:
for Time is the greatest innovator: and
if Time, of course, alter things to the worse,
and wisdom and counsel shall not alter them to the better,
what shall be the end?

Francis Bacon (1561-1626), English philosopher, essayist, statesman.
Essays, "Of Innovations" (1597-1625).

Similar ThreadsPosted
Re: Trepanning and Parting Off - Loose Gibs Chatter Chips May 4, 2008, 6:59 pm
Re: Trepanning and Parting Off - Loose Gibs Chatter Chips May 5, 2008, 3:20 am
Trepanning and Parting Off May 1, 2008, 11:30 am
No longer about "Trepanning and Parting Off -- part 2" May 16, 2008, 7:10 pm
Chatter while parting off. October 30, 2007, 5:16 pm
Some times ya win, somtimes ya loose, September 9, 2006, 7:36 pm
Loose threads for 6-32 taps January 22, 2008, 3:41 pm
lots of printers will be integrated loose manufacturings August 12, 2007, 9:09 pm
Source for loose 3mm ball bearings needed March 20, 2008, 10:35 pm
Clausing 5914 - Loose spindle bearing tightened May 31, 2008, 9:23 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap