Recirculating coolant pump on 4x6 Bandsaw?

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Recirculating coolant pump on 4x6 Bandsaw? Proctologically Violated©® 10-21-2006
Posted by Proctologically Violated©® on October 21, 2006, 10:30 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gunner on October 22, 2006, 12:11 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Proctologically Violated©® on October 22, 2006, 12:41 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gunner on October 22, 2006, 1:14 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Proctologically Violated©® on October 22, 2006, 1:27 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
flood coolant for bandsaw? January 8, 2007, 7:57 pm
Anyone tried this pump for coolant? January 2, 2007, 5:59 am
DIY Coolant Pump For Milling November 22, 2008, 6:59 pm
Coolant Pump recommendations, please. (quickly) April 7, 2007, 1:13 pm
FA: hydraulic pump, right angle gear drive, very heavy caster, Oil pump from large milling machine April 26, 2006, 1:29 am
Horizontal bandsaw vs vertical bandsaw April 28, 2007, 8:46 pm
When to run oiler pump during CNC cycle? Bed lift due to oiler pump. October 27, 2006, 3:34 pm
Coolant January 10, 2007, 9:28 pm
Re: Do it yourself Mist Coolant? July 2, 2006, 9:39 pm
Re: Do it yourself Mist Coolant? July 2, 2006, 9:46 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap