Remove mini mill chuck

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Remove mini mill chuck wv9557 07-27-2006
Posted by on July 27, 2006, 6:20 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on July 27, 2006, 7:32 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on July 27, 2006, 7:46 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Robert Swinney on July 28, 2006, 8:51 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Step up from mini-lathe/mini-mill April 12, 2006, 8:54 pm
Mini Mill Opinions ? January 13, 2007, 11:24 am
Re: Spindle eccentricity on mini mill? March 16, 2006, 10:42 am
Re: Spindle eccentricity on mini mill? March 16, 2006, 2:49 pm
Re: Spindle eccentricity on mini mill? March 16, 2006, 2:50 pm
Re: Spindle eccentricity on mini mill? March 17, 2006, 1:59 pm
how to remove arbor from nichols mill? (newbie question) September 13, 2007, 8:44 pm
Mini-mill conversion to belt drive, kit available now March 28, 2006, 8:21 pm
Shear Pin on a Central Machinery Mini-Mill July 19, 2008, 11:02 pm
Craigslist, SF Bay Area - Mini Servo CNC mill dirt cheap November 5, 2008, 6:29 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap