Rewinding a Bench Grinder Motor

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Rewinding a Bench Grinder Motor Bob AZ 02-09-2007
Posted by Karl Townsend on February 9, 2007, 10:08 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gerry on February 9, 2007, 4:26 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Bob AZ on February 10, 2007, 2:00 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Bench grinder motor for Ig November 5, 2008, 9:43 pm
Bench Grinder December 25, 2007, 8:55 pm
Bench grinder recommendation February 14, 2008, 5:05 pm
6" cut-off wheel in a bench grinder May 27, 2008, 1:31 am
bench grinder wheel replacement? April 23, 2006, 6:10 pm
Ryobi BGH827 8" bench grinder vibration April 13, 2008, 11:04 pm
Re: Ryobi BGH827 8" bench grinder vibration May 17, 2008, 10:40 am
Ryobi BGH827 8" bench grinder vibration - postscript May 25, 2008, 8:08 pm
What diamond/green wheel for side grinding on my bench grinder? November 26, 2008, 12:01 pm
Variable torque motor for belt grinder ? November 22, 2006, 12:14 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap