SHAPER; I stepped down from the Steptoe.

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
SHAPER; I stepped down from the Steptoe. buffalo 01-21-2007
Posted by buffalo on January 21, 2007, 10:58 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Rex on January 23, 2007, 11:19 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gene Kearns on January 23, 2007, 8:15 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by buffalo on January 23, 2007, 9:33 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
20 inch Steptoe Shaper info needed. January 18, 2007, 10:59 pm
shaper disassembly September 19, 2006, 2:08 pm
Sheldon 12" shaper October 19, 2006, 9:22 pm
Keyways on the shaper. My way. November 29, 2006, 10:52 am
SHAPER STILL WANTED March 10, 2007, 8:54 pm
SHAPER SHIPPED! March 19, 2007, 9:52 pm
Logan 7" Shaper May 8, 2006, 9:29 pm
Sheldon shaper March 23, 2006, 2:58 pm
Re: Shaper tool geometry July 26, 2006, 8:23 am
Re: Shaper tool geometry July 26, 2006, 2:22 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap