Scripta grinder

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Scripta grinder Karl Townsend 06-29-2006
Posted by Karl Townsend on June 29, 2006, 3:34 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Karl Townsend on June 29, 2006, 6:28 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Anybody with a Pantograph Engraver Scripta SR2D August 11, 2007, 9:54 pm
nipples grinder ... er ... benchtop grinder. :-) February 20, 2007, 9:41 am
What is a JIG GRINDER and what is it used for December 21, 2006, 9:03 pm
Grinder 4.5" vs. 5" May 11, 2008, 9:54 pm
Surface Grinder October 20, 2006, 1:05 am
Squaring up on the grinder January 4, 2007, 6:30 pm
4" air grinder tooling? May 12, 2007, 11:28 am
Grinder pedestal May 2, 2006, 12:16 pm
Bench Grinder December 25, 2007, 8:55 pm
Surface Grinder May 1, 2006, 12:34 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap