|
Posted by Winston on December 30, 2008, 7:50 pm
Please log in for more thread options Stuart Fields wrote:
> The Sears "Professional Drill Driver" continues to offer quick change
> capability in its keyless chuck by performing the auto loosen function. It
> does not however, always sense properly when I'm going to want to change
> bits. In fact it does seem to have a sense of perversity by loosening up
> and dropping the bit just when I have both hands busy. The wonders of
> modern technology!!
How 'Sears' can you get? :)
If you open the chuck all the way and look down the 'barrel',
do you see a fastener that will allow you to swap the junky
auto-loosen chuck for a proper key-type Jacobs?
Might allow you to limp along till March, when the motor quits.
--Winston
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> capability in its keyless chuck by performing the auto loosen function. It
> does not however, always sense properly when I'm going to want to change
> bits. In fact it does seem to have a sense of perversity by loosening up
> and dropping the bit just when I have both hands busy. The wonders of
> modern technology!!