Setting Lathe compound at precise angle, a Real Keeper!!!

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Setting Lathe compound at precise angle, a Real Keeper!!! spaco 08-05-2007
Posted by Harold and Susan Vordos on August 6, 2007, 1:13 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Robert Swinney on August 6, 2007, 9:40 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by cavelamb himself on August 13, 2007, 1:14 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
What is your technique for seting lathe compound at a precise angle? August 4, 2007, 3:18 pm
compound angle July 27, 2007, 8:17 pm
Compound angle milling? March 28, 2008, 9:59 am
Quick unlocking of compound base on lathe September 13, 2007, 1:17 pm
Setting up a Clausing lathe on three 4x4s October 27, 2008, 1:53 am
Sine Bar for setting lathe tapers -Atten Nick Mueller August 28, 2007, 3:27 pm
Nut Keeper April 10, 2008, 7:33 am
my precise builder won't enter before I owe it August 12, 2007, 8:36 pm
Who knows about my Precise Product Corp Milling machine June 1, 2007, 11:37 pm
fractured compound June 25, 2007, 10:51 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap