Setting up job in 3 jaw chuck. Do you think I should machine chuck jaws???

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Setting up job in 3 jaw chuck. Do you think I should machine chuck jaws??? fossil 01-30-2007
Posted by fossil on January 30, 2007, 5:32 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jeff R. on January 30, 2007, 5:43 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by fossil on January 30, 2007, 5:51 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by fossil on January 30, 2007, 6:22 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Nick Mueller on January 30, 2007, 6:33 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Jaws for a Rockwell chuck? May 2, 2006, 5:42 pm
polyurethane chuck jaws for a lathe November 25, 2007, 8:36 pm
Re: Chuck Key for Lodge & Shipley Collet Chuck August 26, 2006, 4:43 pm
Bison 5C collet chuck vs. Kalamazoo 1CC collet chuck vs. drawtube / collet closer August 1, 2007, 4:26 pm
setting up a machine shop December 11, 2006, 2:40 am
6" or 8" chuck April 11, 2007, 2:59 am
where to buy a new 3 jaw chuck? January 23, 2008, 4:34 pm
FS: New 6 x 18 magnetic chuck July 9, 2006, 9:16 pm
FS: New 6 x 18 magnetic chuck July 9, 2006, 9:16 pm
Re: Jacobs chuck August 1, 2006, 11:04 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap