Sharpening carbide

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Sharpening carbide JayCups 12-29-2006
Posted by JayCups on December 29, 2006, 7:09 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by dcaster@krl.org on December 29, 2006, 7:59 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jim Sehr on December 29, 2006, 9:25 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
How much of Dillon's Carbide dies are Carbide? September 4, 2007, 6:14 pm
Carbide Insert and Carbide Depot November 22, 2007, 8:04 pm
FS-Saw sharpening equipment August 4, 2006, 6:05 am
HSS End Mill Sharpening December 7, 2006, 4:23 pm
Sharpening Forstners November 18, 2007, 7:08 pm
End mill sharpening October 11, 2008, 10:56 pm
Sharpening a Pipe Reamer October 24, 2006, 1:17 pm
End mill sharpening in Dallas, TX January 6, 2007, 3:27 pm
Sharpening chipper blades November 18, 2007, 1:59 pm
Chainsaw sharpening redux December 17, 2007, 1:34 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap