Simple Strobe Tach

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Simple Strobe Tach Jeff Wisnia 05-11-2007
Posted by Jeff Wisnia on May 11, 2007, 6:57 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Gerald Miller on May 12, 2007, 12:59 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jeff Wisnia on May 12, 2007, 10:14 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
3 cylinder tach May 11, 2008, 8:09 pm
1970 Ford tractor tach cable May 11, 2008, 2:19 pm
It's Alive - It's A Live Tailstock Center with a Tach attack omiter October 17, 2008, 12:54 pm
Just out of simple curiousity July 16, 2006, 12:37 pm
Simple Gauge Rod. September 20, 2006, 10:39 pm
Simple Machines: three or six? November 23, 2008, 2:13 pm
Re: Simple Machines: three or six? November 25, 2008, 4:47 am
buy a simple part instead of machinning it July 12, 2006, 6:33 pm
"Simple crane project" November 2, 2006, 2:30 am
simple tube layout? February 18, 2008, 1:45 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap