|
Posted by Martin H. Eastburn on January 25, 2008, 10:43 pm
Please log in for more thread options Mark -
Can you give a short description on how to do just the balancing
mode with the sliding weights on the spindle nut.
Martin
Martin H. Eastburn
@ home at Lions' Lair with our computer lionslair at consolidated dot net
TSRA, Endowed; NRA LOH & Patron Member, Golden Eagle, Patriot's Medal.
NRA Second Amendment Task Force Charter Founder
IHMSA and NRA Metallic Silhouette maker & member.
http://lufkinced.com/
Mark Rand wrote:
>
>> the wheels have the letters BAL painted on them so I expected
>> that indicated they were balanced.
>
> Wheels will generally need balancing after you first mount and dress them.
> Does the grinder have balancing weights on the wheel arbour?
>
>
> Mark Rand
> RTFM
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
>ENCO 1/2 x 7 wheel. The wheel had some bad vibration so I replaced the
>spindle bearings. I have three Enco wheels and some vibrate more than
>others, the wheels have the letters BAL painted on them so I expected
>that indicated they were balanced. I was a Tool & Die Maker in the
>late 50's and spent a significant amount of time using the 6 X 12
>Boyar Schultz manual grinder. I never experienced a vibration and am
>not sure where to begin sorting out this problem. The ENCO Wheels were
>not very expensive and I wonder if the problem is the inexpensive
>wheel or the drive mechanism.
>Any suggestions are appreciated.
>Thanks ....Al Basham