Taig Variable Speed

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Taig Variable Speed Cosmopolite 02-24-2007
Posted by Cosmopolite on February 24, 2007, 4:34 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ron Thompson on February 27, 2007, 9:56 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Cosmopolite on March 3, 2007, 7:21 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
RPM of variable speed DC Motors September 29, 2007, 10:09 pm
Drill press and Variable Speed September 3, 2007, 2:38 pm
Clausing 1500 variable speed pulley problems August 17, 2006, 5:21 pm
Variable Speed Spindle Lube. for an old Tree Mill December 19, 2006, 2:58 pm
Variable flow/volume from a hydraulic constant speed pump April 5, 2007, 5:52 pm
how to bypass dremel tool internal variable speed control? September 9, 2007, 10:21 pm
Continuously-Variable Speed Drill Press - Recommendation Needed (no belt-changing pulleys!) October 18, 2006, 2:53 pm
Taig Mill T-Slot Size March 22, 2006, 8:38 pm
Variable Freq. Drive? May 3, 2006, 12:42 pm
variable frequency drive March 27, 2006, 3:02 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap