Tapered Pipe Threads: How to get Tight Joints in a Particualr Direction?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Tapered Pipe Threads: How to get Tight Joints in a Particualr Direction? Doug White 09-30-2006
Posted by on September 30, 2006, 7:23 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Cydrome Leader on October 1, 2006, 11:55 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on October 2, 2006, 2:37 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jim Stewart on October 2, 2006, 2:52 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Wild Bill on September 30, 2006, 11:58 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
tapping tapered pipe thread October 6, 2006, 8:07 am
length of threads on 1 inch black pipe? and reamer usage January 3, 2008, 3:43 am
Re: gap in weld joints August 26, 2006, 6:39 pm
Cutting accurately enough for welding joints October 3, 2006, 8:28 pm
90 Degree joints, square tube steel April 20, 2006, 12:42 am
Tight radius bending April 14, 2008, 9:23 am
Tapered shfts November 24, 2008, 4:44 am
How tight is a gear stuck on a shaft? October 10, 2008, 11:00 pm
+++++ Free Video Pics Downloads ++++++ Tight (!) January 11, 2007, 1:25 am
don't identify the livers tight, spring them individually August 12, 2007, 8:04 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap