Tech Q on desmut solution for aluminium

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Tech Q on desmut solution for aluminium _ 09-13-2007
Posted by _ on September 13, 2007, 8:08 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Bob Engelhardt on September 13, 2007, 11:27 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by DoN. Nichols on September 13, 2007, 11:48 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jon Elson on September 15, 2007, 1:48 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
astro solution, marketing solution, stationary printing, ..printing machine..... too much more than your desire January 20, 2007, 7:39 am
OT - Tech July 7, 2006, 6:04 pm
RFI - Manual or tech info for DRC 600 DRO September 26, 2006, 6:26 pm
OT: stupid high tech car show February 22, 2007, 9:11 am
Machine Repair in the CT Vo-Tech System November 14, 2008, 4:59 pm
OT Virginia Tech terrorist chinese national April 17, 2007, 3:56 am
Re: Gorilla Tech Desktop CNC Mills and 3D Laser Scanner November 12, 2006, 6:17 am
Harbor Freight (Cen-Tech) Digital Caliper #93940 December 9, 2006, 9:48 pm
Aluminium Flywheel July 9, 2007, 8:56 am
Source for aluminium flat October 8, 2006, 1:07 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap