Too late the motor is toast :(. Need hints on new motor

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Too late the motor is toast :(. Need hints on new motor Camilo Ramos 09-22-2007
Posted by Camilo Ramos on September 22, 2007, 11:08 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Christopher Tidy on September 23, 2007, 8:08 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Karl Townsend on September 23, 2007, 8:22 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Camilo Ramos on September 23, 2007, 9:03 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Ignoramus3778 on September 24, 2007, 7:02 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
using a DC motor as a generator, for an AC motor-driven DC welder (pix posted) May 21, 2008, 4:34 pm
Should I change to 1 PH motor or by converter for 3 ph motor November 13, 2007, 10:39 pm
Can a 50 Hz motor run on 60 Hz June 7, 2007, 10:03 am
1HP 90v PM DC Motor. Where? August 9, 2007, 11:36 am
Need more motor help October 9, 2007, 12:53 am
DRO toast? December 6, 2007, 12:45 am
Bandsaw MOtor Help July 23, 2006, 4:00 pm
Motor Question... July 31, 2006, 9:21 am
Re: DC motor - uh oh, in over my head August 15, 2006, 8:47 pm
electric motor September 17, 2006, 3:12 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap