Tool grinding

Home| Search | About

User Password

Lost Password?

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

Yahoo!

Google

Windows Live

del.icio.us digg

digg

Netscape

Subject

Author

Date

05-03-2007

Posted by Gerry on May 3, 2007, 11:46 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Posted by dcaster@krl.org on May 4, 2007, 12:21 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Jim Sehr on May 4, 2007, 1:44 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Posted by Tom Gardner on May 4, 2007, 3:26 am

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Similar Threads	Posted
Tool grinding angles	August 7, 2006, 9:00 am
tool & cutter grinding book	August 27, 2006, 7:11 am
Grinding M42 tool blanks for use on shaper or lathe	December 8, 2006, 9:57 pm
RANT/follow up re Query - fly cutter tool grinding geometry	July 12, 2007, 9:11 am
FS Tool cabinets from tool supply	May 18, 2007, 12:38 am
Herbert No2 grinding jig	September 23, 2006, 11:55 pm
grinding finish	July 11, 2007, 8:56 am
OT But Has Some Metal Grinding...	March 3, 2008, 9:18 am
Tungsten Grinding	April 20, 2008, 8:41 pm
Grinding wheel safety	October 4, 2006, 8:41 pm

XML Sitemap