Tooling for Fiberglass...

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Tooling for Fiberglass... Joe AutoDrill 07-09-2007
Posted by Joe AutoDrill on July 9, 2007, 1:31 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Half-nutz on July 9, 2007, 3:19 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Joe AutoDrill on July 9, 2007, 3:27 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jeffrey Lebowski on July 9, 2007, 4:57 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Epictitus on July 9, 2007, 8:04 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
OT: Fiberglass expert hekp needed June 26, 2007, 9:47 pm
Need high temp fiberglass insulation April 23, 2008, 10:26 am
off topic - tape to stick to kraft-backed fiberglass insulation? December 9, 2006, 6:46 pm
Pro CNC tooling February 17, 2007, 8:52 am
FA: Lathe tooling July 15, 2006, 10:56 am
tooling in Vernon TX December 13, 2006, 3:45 pm
WTB B&S #9 tooling for Burke #4 March 22, 2007, 11:19 am
4" air grinder tooling? May 12, 2007, 11:28 am
Re: Tooling question June 4, 2007, 8:05 pm
Re: Tooling question June 4, 2007, 8:13 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap