Toolmex/ Bison Threading Tool Holders

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Toolmex/ Bison Threading Tool Holders Sierevello@aol.com 12-01-2006
Posted by Sierevello@aol.com on December 1, 2006, 9:31 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by tim on December 2, 2006, 1:52 am
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Sierevello@aol.com on December 2, 2006, 3:22 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by tim on December 3, 2006, 2:49 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
WTB: #35 tool holders May 15, 2008, 5:31 am
Milled Down Tool Holders April 6, 2006, 8:23 pm
Size of KDK-100 vs BX Tool holders July 18, 2008, 8:13 pm
help - what tool holders hold these facemills October 30, 2006, 12:56 am
Making Tool Storage Holders February 13, 2007, 9:51 pm
Good deal on quick change tool holders October 21, 2007, 9:00 pm
Lathe tool post QCTP carbide insert holders January 7, 2007, 10:44 am
FA: New Bison 5C "Set-Tru" Collet Chuck July 18, 2006, 6:28 pm
Bison R8 ER-16 collet chuck July 13, 2007, 11:15 pm
Bison R-8 slitting saw arbor arrived August 8, 2007, 10:52 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap