Trying to twist square tubing

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Trying to twist square tubing pccruiser 11-15-2006
Posted by pccruiser on November 15, 2006, 5:01 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Nick Mueller on November 15, 2006, 5:11 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by dcaster@krl.org on November 15, 2006, 5:15 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Jim Stewart on November 16, 2006, 5:38 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Proctologically Violated©® on November 15, 2006, 6:37 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
DOM Square Tube - Twist and Straightness November 7, 2007, 5:26 pm
Help bending square tubing December 23, 2006, 5:59 pm
round vs square tubing December 9, 2007, 2:38 am
Square tubing finish options November 28, 2007, 2:20 am
Delrin square tubing or angle bar? June 26, 2008, 1:23 am
6 " SQUARE TUBING vs. 6" channel Building 25' trailer February 3, 2008, 12:06 am
OT: New twist on getting old September 9, 2008, 7:55 pm
OT - new eBay twist - minimum purchase September 5, 2008, 9:16 pm
Post Type Twist Drill Question March 2, 2007, 8:48 pm
no nice past nationalists far from twist as the dry visits aid August 12, 2007, 10:06 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap