Turning 4140 half hard

Home| Search | About
User Password
Register Now! Lost Password?

General Metalworking - All aspects of working with metal. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Turning 4140 half hard John Roncallo 06-05-2007
Posted by John Roncallo on June 5, 2007, 9:32 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by John on June 5, 2007, 10:50 pm
Please log in for more thread options
>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by on June 6, 2007, 8:02 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Trevor Jones on June 6, 2007, 8:27 am
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Posted by Anthony on June 6, 2007, 5:53 pm
Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore


Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.




Similar ThreadsPosted
Turning 4140 Pre Hardened June 23, 2007, 10:46 am
Recommendation for tap fit hole tolerance in 4140 pre-hard steel November 29, 2007, 8:29 pm
Atlas 10 or 12 Half nuts FS October 31, 2006, 11:12 pm
Re: Cutting an old fridge in half May 16, 2006, 8:01 pm
Re: Cutting an old fridge in half May 16, 2006, 6:51 pm
Rear half of a truck chassis plus imaginaton... March 22, 2006, 12:02 am
it learned, you dived, yet Sayed never half dominated since the space August 12, 2007, 5:04 pm
fab question - I need to make/buy a thin SS half round tube January 20, 2008, 12:54 pm
Student made a half sized tank (hey Nick!) April 7, 2008, 4:11 pm
who suggests half, when Zephram fails the chief running next to the workstation August 12, 2007, 11:29 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap