|
Posted by Mark Rand on May 16, 2006, 7:49 pm
Please log in for more thread options
I need to make a 2' 6" x 1' hole in a lightly reinforced 8" deep concrete
floor. There is already a 12" diameter hole in the middle but it ain't big
enough. I was thinking of using a 4 1/2" diamond core drill that I already
have to cut out the corners, a 9" angle grinder to join the corners up and
then hammer in steel wedges to try to crack the concrete out cleanly.
If I can get beneath any rebars with the angle grinder I reckon that I've got
a chance to do it, however I've got one concern...
The diamond core drills that I have are general purpose, light weight dry
cutting ones. To cut this sort of depth in concrete and through any rebars
that I find, I suspect that I would do better with vacuum or water cooling and
dust removal for the drill. Vacuum would be difficult and the core drill and
arbour aren't really designed for water injection.
I can make a shroud to go over the top of the drill, drill some holes in its
top face and introduce water that way, hoping that the zero-pressure water
will find its way down the inside face of the drill and up the outside face.
I could drill a small hole across the path of the big drill with a 1 1/2" core
drill pecking to remove the dust and cool the drill. I could then get a
sufficient supply of water to the big drill to stop it from overheating or
clogging.
In either case I plan to use an old (late 40's) bench drill anchored to the
floor, with its head back-to-front to avoid the base for driving the drill.
This should keep the drill straight and help to avoid the muscle spasms that
would result from trying to do 24" of hole with a hand held drill motor
Anyone got better ideas, other than hiring it out?
Mark Rand
RTFM
|
|
Posted by c.henry on May 16, 2006, 8:27 pm
Please log in for more thread options
here in nashville , having a guy come out and cut that would be about
200 , or you can rent the stuff at sunbelt for about 1oo for a half day
and do it yourself ,
as to using water with a dry bit , it is perfectly acceptable , we use a
five gallon bucket with a couple of drops of joy detergent in the water
and use a small cup to pour down the side of the core bit , pulling the
bit and flushing with water and air every couple of inches ,
if you think it cuts well dry , try it wet you would be amazed
|
| Similar Threads | Posted | | Do diamond drills break easily? | February 5, 2007, 7:20 am |
| shank adapter, extension rod, button bit, thread bit,taper bit, taper rod, drill rod, drill bit, corss bit, chisel bit, DTH hammer drilling ,rock drill, drill tube, casing shoe, drilling tool, core bit, core barrel, ODEX, TUBEX, quarrying,mining equipment | September 8, 2006, 2:22 am |
| flux-core with no gas nozzle? | July 24, 2007, 11:21 pm |
| is HF .35 flux core any good? | March 23, 2006, 1:49 am |
| anybody have one of THESE old steel reels? I need a "core axle" for it...(pix) | October 3, 2008, 1:33 pm |
| babbitting - sooting the shaft, drilling the core for 'excess flow', gasoline stove pump cups? | May 22, 2008, 11:42 am |
| Re: Drills... Why? | October 9, 2007, 11:38 am |
| Re: Drills... Why? | October 9, 2007, 12:32 pm |
| Re: Drills... Why? | October 10, 2007, 3:58 pm |
| Re: Drills... Why? | October 10, 2007, 10:53 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap