What insert do I use?

Home| Search | About

User Password

General Metalworking - All aspects of working with metal.

Bookmark this page: YahooMyWeb

YahooMyWeb

Google

Windows Live Favorites

del.icio.us

del.icio.us digg

digg

Add to Netscape

Subject

Author

Date

What insert do I use?

11-04-2006

Re: What insert do I use?

Re: What insert do I use?

Posted by JayCups on November 4, 2006, 7:25 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Posted by Steve Smith on November 4, 2006, 8:15 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Posted by JayCups on November 6, 2006, 7:39 pm

Please log in for more thread options

>I will give that a try if I can't find the ammonium version. I have some
>pipe flux with zinc chloride but it is only 8%.
>
> --
> Glenn Ashmore

Don't forget, you can make your own (much stronger) by killing some
hydrochloric acid with a handful of zinc. (I presume you have zinc lying
around if you're galvanising stuff.) Otherwise use scrap galvanised steel.

Cheers
--
Jeff R.

Similar Threads	Posted
Looking for 0-80 insert	March 31, 2006, 9:41 am
Need Help Identifying Carbide Insert	July 23, 2006, 12:44 am
Insert Tooling Recommendations?	January 13, 2007, 1:58 am
Indexable Insert Grades?	July 10, 2007, 10:47 am
Indexable insert end mill	August 17, 2008, 8:43 pm
A bit of pipe, a carbide insert, a little brazing, ...	June 11, 2008, 4:14 pm
Rockwell hardness of valve seat insert	August 29, 2007, 10:49 pm
Carbide insert screw pocket seat angle.	July 9, 2006, 1:32 am
try weeping the queue's jolly independence and Peter will insert you	August 12, 2007, 7:43 pm
What size drill bit is needed for a 5/8 -18 heli coil insert tap?	April 25, 2008, 1:02 pm

Contact Us | Privacy Policy

XML Sitemap